Digilent 410-044-10P-KIT Bedienungsanleitung PDF herunterladen (Seite 37)

Spartan-3 Starter Kit Board User Guide www.xilinx.com 37

UG130 (v1.1) May 13, 2005 1-800-255-7778

Program Push Button/DONE Indicator LED

The Spartan-3 Starter Kit Board includes two FPGA configuration functions, located near

the VGA connector and the AC power input connector, as shown in Figure 9-1. The PROG

push button, shown as in Figure 9-1, drives the FPGA’s PROG_B programming pin.

When pressed, the PROG push button forces the FPGA to reconfigure and reload it

configuration data.

The DONE LED, shown as in Figure 9-1, connects to the FPGA’s DONE pin and lights

up when the FPGA is successfully configured.

Slave Parallel

<0:1:1>

Another device connected to the B1 expansion connector

provides parallel data and clock to load the FPGA.

JTAG

<1:0:1>

The FPGA waits for configuration via the four-wire JTAG

interface.

Table 9-1:

Header J8 Controls the FPGA Configuration Mode

(Continued)

Configuration

Mode

<M0:M1:M2>

Header J8

Settings

Jumper JP1

Setting

Description

MODE

M0 M1 M2

GND

JP1

MODE

M0 M1 M2

GND

JP1

Figure 9-1:

The PROG Button and the DONE LED

PROG

DONE

VGA

UG130_c9_03_042704

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 63 64

Kommentare zu diesen Handbüchern

Keine Kommentare

Digilent 410-044-10P-KIT Bedienungsanleitung Seite 37

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Digilent 410-044-10P-KIT