Digilent 240-009P Bedienungsanleitung PDF herunterladen

www.digilentinc.com

Revision: September 26, 2006 215 E Main Suite D | Pullman, WA 99163

(509) 334 6306 Voice and Fax

Doc: 502-011 page 1 of 4

Overview

The Digilent FX2 Breadboard (FX2BB) offers a

ready-made solution for prototyping

breadboarded or wire-wrapped circuits as

accessories to Digilent system boards. The

FX2BB provides connectors suitable for direct

connection of various Digilent system boards

and Digilent Pmod

peripheral modules.

The FX2BB is available in a wire-wrap version

or a solderless breadboard version.

Features include:

• two 630 tie point breadboards separated

by 100 tie point bus strip (solderless

breadboard version)

• 32x65 hole wire-wrap area (wire-wrap

version)

• four 6-pin male header

• four 6-pin female header

• FX2 connector

• prototype/wire-wrap connections on

every signal

• two power buses and one ground plane.

Functional Description

Power Connections

The FX2BB provides two power busses and a

ground bus. The two power busses are labeled

VU and VCC. These two busses are made

available at each connector position on the

board. There is also a ground plane that

connects the ground pins from all connectors

together.

The usual Digilent convention is to power the

VCC bus at 3.3V and the VU bus at 5.0V.

However depending on the system board

connected and the power supply used, other

Figure 1

Digilent FX2 Breadboard

Figure 2

Block Diagram

voltages may be present. But observe caution

before using any voltage other than 3.3V on

the VCC bus. Most Digilent system boards will

be damaged if the voltage on the VCC bus is

greater than 3.3V.

FX2 Connecter

J12 J13

Solderless

Breadboard or

Wire-wrap

J9 J10

J5-8J1-4

Female

Pmod

Male

Pmod

1 2 3 4

Overview 1
Functional Description 1

Inhaltsverzeichnis

Seite 1 - Functional Description

DDiiggiilleenntt FFXX22 BBrreeaaddbbooaarrdd RReeffeerreennccee MMaannuuaall ®www.digilentinc.com Revision: September 26, 2006 215 E Main Suite D

Seite 2

FX2BB Reference Manual Digilent, Inc. Rev: July 18, 2006 www.digilentinc.com Page 2 of 4 Banana jacks J14-J16 provide connection points for c

Seite 3

FX2BB Reference Manual Digilent, Inc. Rev: July 18, 2006 www.digilentinc.com Page 3 of 4 Table 1: FX2 Signals and Connector Pinout A B

Seite 4

FX2BB Reference Manual Digilent, Inc. Rev: July 18, 2006 www.digilentinc.com Page 4 of 4 45 IO40 45 GND 46 GND 46 CLKIN (from peripheral

Kommentare zu diesen Handbüchern

Keine Kommentare

Digilent 240-009P Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Hardware Digilent 240-009P herunter. Digilent 240-009P User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Digilent 240-009P